Lowrance electronic GPS Receiver iFINDER GO User Manual

Pub. 988-0148-622  
iFINDERGo  
Handheld Mapping GPS Receiver  
Operation Instructions  
offered by www.Busse-Yachtshop.de  
email: in[email protected] Tel: +49 (0)4347 908234  
 
Introduction  
Welcome to the exciting world of GPS satellite navigation! We know  
you're anxious to begin finding your way with this amazing technology,  
but we have a favor to ask. Before you grab the batteries and head  
outside, please give us a moment or two to explain how our manual can  
help you get the best performance from this remarkable little GPS unit.  
First, we want to thank you for buying an iFINDER. Whether you're a  
first-time user or a professional navigator, you'll discover that the  
iFINDER is a true pocket-sized, full-featured mapping GPS receiver.  
Our goal for this book is to get you on the road or out to the woods and  
water fast, with a minimum of fuss. Like you, we'd rather spend more  
time traveling, and less time reading the manual! In the following  
pages you can find instructions on how to use all of the iFINDER's  
basic functions.  
NOTE:  
For the power users out there, the iFINDER Go also has an  
Advanced Mode, which allows you an even greater degree of control  
over your device's settings. For details on Advanced Mode  
Operation, look for the iFINDER Go Advanced User's Guide on our  
If you would like to know more about GPS and its companion system  
WAAS, visit our web site and check out the GPS Product Guide section  
frequently asked questions and a glossary.  
Batteries  
The unit requires two 1.5-volt AA batteries. Do not mix different  
battery types. Mixing battery types may cause leakage.  
The following page contains an 11-step quick reference for Easy Mode  
operation. If you don't want to carry the manual with you as you  
practice with iFINDER, you might consider photocopying this quick  
reference page and tucking it into your pocket.  
1
offered by www.Busse-Yachtshop.de  
email: in[email protected] Tel: +49 (0)4347 908234  
 
iFINDER Easy Mode Quick Reference  
1. Install two AA batteries in the battery compartment on back of case.  
2. To turn on iFINDER, press and release PWR key.  
3. Opening screen displays map of North America at the 4,000 mile  
zoom range. Rotate through the three main Page screens (Map Page,  
Satellite Status Page, Navigation Page) by repeatedly pressing PAGES  
key. Switch Pages to display Satellite Status Page.  
4. Wait while unit locates satellites and calculates current position. Process  
is visible on Satellite page. This takes an average of 1 minute or less under  
clear sky conditions (unobstructed by terrain or structures). When the unit  
acquires position, a position acquired message appears.  
5. With position acquired, press PAGES key to display Map Page, which  
shows a bird's eye view of the earth. You can move around the map by:  
Zoom in closer to see greater detail: press ZIN (zoom in key.)  
Zoom out to see more area, less detail: press ZOUT (zoom out key.)  
Scroll map north, south, east or west using arrow keys ↑ ↓ → ←.  
To stop scrolling and return to current position on map, press EXIT key.  
6. Set Home waypoint at your current position so you can navigate back  
here: press ENT|ENT.  
7. Zoom/scroll map to find a nearby object or location. Use arrow keys to  
center cursor cross-hair over the map object or location.  
8. To navigate to the selected location: press MENU|ENT|EXIT. Follow  
steering arrow on Map Page or compass bearing arrow on Navigation Page.  
9. At destination, Arrival Alarm goes off; to clear it, press EXIT. Cancel  
navigation: press MENU|to CANCEL NAVIGATION|ENT|to YES|ENT.  
10. Navigate back home by Go To Home or Navigate Trail. Go Home:  
press FIND|ENT; follow navigation arrows. Trail: press MENU|to  
NAVIGATE TRAIL|ENT. Wait while route is calculated, then follow arrows.  
11. Back home, Arrival Alarm goes off; press EXIT. Cancel navigation:  
press MENU|to CANCEL NAVIGATION|ENT|to YES|ENT.  
2
offered by www.Busse-Yachtshop.de  
email: in[email protected] Tel: +49 (0)4347 908234  
 
Easy Mode Operation  
This section addresses Easy Mode operation for iFINDER's main GPS  
functions. The principles are the same in both operating modes, so this  
discussion also serves as a good introduction to Advanced Mode work.  
The iFINDER Keypad  
You'll control the iFINDER Go with its keyboard, which includes:  
PWR/LIGHT (Power & Light) – The PWR key turns the unit on and off  
and activates the backlight. Turn off the unit by pressing and holding  
the PWR key for 3 seconds.  
PAGES – Pressing this key switches the unit between the three  
different page screens in Easy Mode. (Satellite, Navigation and Map.)  
Each page represents one of the unit's major operation modes.  
MENU – Press this key to show the menus, which allow you to select or  
adjust a feature from a list.  
ARROW KEYS – These keys are used to navigate through the menus,  
make menu selections, move the map cursor and enter data.  
ENT/SAVE (Enter & Save) – This key allows you to save data, accept  
values or execute menu commands.  
EXIT – The Exit key lets you return to the previous screen and clear  
data or close menus.  
FIND – The Find key launches the iFINDER search menus.  
ZOUT and ZIN – (Zoom Out and Zoom In) – These keys let you zoom  
the screen in or out to see either a larger geographic area on the map,  
or greater detail in a smaller map area. You can press ZOUT and ZIN at  
the same time to create a Man Overboard waypoint at your current  
location and begin navigating back to it.  
Main Menu  
Easy Mode has a single Main Menu, which contains the commands you'll  
use to operate your iFINDER. Some important Main Menu commands  
and their functions are:  
3
offered by www.Busse-Yachtshop.de  
email: in[email protected] Tel: +49 (0)4347 908234  
 
Screen command: changes the contrast or brightness of the display.  
Software Info command: shows the product name and software version  
of the unit's operating system software, as well as copyright notices.  
Advanced Mode command: used to switch to Advanced Mode operation.  
Pages  
Easy Mode has three Page displays that represent the three major  
operating modes. They are the Satellite Status Page, the Navigation  
Page and the Map Page. They are accessed by pressing the PAGES key,  
which cycles among them.  
Navigation Page  
This Page has a compass rose. It shows your direction of travel and the  
direction to a recalled waypoint. The navigation screen looks like the  
one in the following image when you're not navigating to a waypoint or  
other destination. Your position is shown by an arrow in the center of  
the screen. Your trail history, or path you've taken, is depicted by the  
line extending from the arrow.  
Compass  
Present position  
arrow  
rose  
Trail line  
Navigation  
information  
display  
The Navigation Page looks like this when iFINDER is not navigating.  
When navigating to a waypoint or following a route, the Navigation  
screen looks like the one shown in the following image.  
4
offered by www.Busse-Yachtshop.de  
email: in[email protected] Tel: +49 (0)4347 908234  
 
Current track or  
heading, shown  
in degrees  
Compass bearing  
to destination  
Bearing  
arrow  
Waypoint  
symbol  
Trail line  
Navigation  
information  
display  
Destination  
name  
Navigation Page, backtracking a trail.  
Satellite Status Page  
This Page, shown in the following images, provides detailed  
information on the status of iFINDER's satellite lock-on and position  
acquisition. To get to the Satellite Status Page: press PAGES repeatedly  
until the page you want appears.  
This page shows you the quality and accuracy of the current satellite  
lock-on and position calculation.  
Satellite Page shown at left with no position and no satellites, in center  
with satellites acquired (but no lock), and at right with a 3D position lock.  
5
offered by www.Busse-Yachtshop.de  
email: in[email protected] Tel: +49 (0)4347 908234  
 
WARNING:  
Do not begin navigating with this unit until the numbers  
have stopped flashing! On any display page, a flashing  
current position indicator/question mark symbol and  
flashing GPS data displays indicate that satellite lock has  
been lost and there is no position confirmed.  
Map Page  
The map screens show your course and track from a "bird's-eye" view.  
By default, this unit shows the map with north always at the top of the  
screen. If you're navigating to a waypoint, the map also shows your  
starting location, present position, course line and destination.  
Using the map is as simple as pressing the PAGES key. A screen similar  
to those in the following images appears. The arrow flashing in the  
center of the screen is your present position. It points in the direction  
you're traveling. The solid line extending from the arrow is your plot  
trail, or path you've taken.  
Map Page screen and various zoom levels.  
Use the Zoom In and Zoom Out keys to enlarge or reduce the map's  
coverage area and the amount of mapping detail shown.  
The map data loaded in your iFINDER Go contains a low-detail world  
map and a medium detail USA map. The Go2 model contains the same  
maps plus high detail USA lake, river and coastal shoreline data.  
6
offered by www.Busse-Yachtshop.de  
email: in[email protected] Tel: +49 (0)4347 908234  
 
The low-detail world map contains some large cities and most country  
political boundaries. The medium-detail U.S. map contains: all  
incorporated cities; shaded metropolitan areas; county boundaries;  
some major city streets; Interstate, U.S. and state highways; lakes and  
streams and more than 60,000 navigation aids and 10,000 wrecks and  
obstructions in U.S. coastal and Great Lakes waters. The map also  
contains exit services information for Interstate highways.  
The iFINDER Go2 International contains a worldwide reference map  
with basic coverage of country political boundaries, major lakes, rivers  
and coastal waters, plus key cities, and major and minor highways.  
Moving Around the Map: Zoom & Cursor Arrow Keys  
The map is presented from a bird's eye view perspective. The current  
zoom range shows in the lower left corner of the screen.  
1. Press the ZIN key (zoom in) to move in closer and see greater detail in a  
smaller geographic area.  
2. Press the ZOUT key (zoom out) to move farther away and see less map  
detail, but a larger geographic area.  
When you are walking or riding in a vehicle, the map will automatically  
move as you move. This keeps your current location roughly centered  
on the screen.  
You can manually pan or scroll the map northward, southward,  
eastward or westward by using the arrow keys, which launches the  
cross-hair map cursor. This allows you to look at map places other than  
your current position. To clear the cursor, press EXIT, which jumps the  
map back to the current position or the last known position.  
Selecting Any Map Item with the Cursor  
1. Use the zoom keys and the arrow keys to move around the map and  
find the item you wish to select.  
2. Use the arrow keys and center the cursor cross-hair on the desired  
object. On most items, a pop-up box will give the name of the selected item.  
You will also notice a black ring surrounds the item as it becomes  
7
offered by www.Busse-Yachtshop.de  
email: in[email protected] Tel: +49 (0)4347 908234  
 
selected. Once that happens, if you press FIND the Find Menu will pop  
up with an extra option at the top of the list: SELECTED ITEM. Press ENT to  
see the Waypoint Information screen for the selected item.  
Set Home Waypoint  
A waypoint is simply an electronic "address," based on the latitude and  
longitude of a position on the earth. Easy Mode allows you to save two  
waypoints (Home and Man Overboard). To save a Home Waypoint: 1.  
Press and release ENT. 2. The SAVE AS HOME WAYPOINT? menu appears,  
with YES highlighted. To accept yes, press ENT. The waypoint appears  
on the map as an X, named "Home."  
Pop-up box  
Save Home Waypoint menu, left. At right, Home waypoint, with X  
symbol and name. When selected by the cursor, the pop-up box appears.  
The example shows waypoint set at the cursor location. If cursor was  
not active, the point would be placed at the current position.  
Caution:  
Saving a new "Home" waypoint will overwrite and erase the  
previous "Home" waypoint.  
Navigate Back Home  
This command will automatically take you back to the "Home"  
waypoint you created.  
1. Press FIND|ENT; then follow navigation arrows on the Map Page or  
the compass rose on the Navigation Page.  
To stop navigating to the waypoint, use the Cancel Navigation command.  
8
offered by www.Busse-Yachtshop.de  
email: in[email protected] Tel: +49 (0)4347 908234  
 
Navigate to Cursor Position on Map  
The Go To Cursor command navigates to the current cursor position  
on the map. It's a quick and handy way to navigate to anything you can  
see on the map display. Simply select the item with the map cursor as  
described earlier, then press MENU|ENT to make the iFINDER begin  
navigating to the cursor location.  
The Map Page will display a dotted line from your current position to the  
cursor position. The Navigation Page displays a compass rose showing  
navigation information to your destination. See the following examples.  
To stop navigating to the cursor, use the Cancel Navigation command.  
Creating and Saving a Trail  
A trail, or plot trail, is a history of the path you have taken. On the  
screen, trails are represented by a solid line extending from the back of  
the current position arrow.  
This unit automatically creates a plot trail when turned on, and this  
trail is automatically saved in memory when the unit is turned off. The  
iFINDER continues recording the same trail until you "clear the trail,"  
which erases the old trail and starts creation of a new trail.  
Navigating or Backtracking a Trail  
There are two methods for following your back trail. The simplest  
requires no menu commands at all, but provides no navigation  
information during the trip. The other requires only three key strokes and  
provides a full range of navigation data. Try both methods and see which  
you prefer. When hiking at walking speed, we often just use visual back  
trailing. At faster speeds, the Navigate Trail command is handy.  
Visual Back Trailing  
1. On the Map Page, zoom (ZIN or ZOUT) so your flashing trail is visible.  
2. Begin moving and watch the Map Page (or Navigation Page, if you  
prefer). Simply walk or steer so that your current position arrow traces  
along the trail you have just made.  
9
offered by www.Busse-Yachtshop.de  
email: in[email protected] Tel: +49 (0)4347 908234  
 
Navigate a Back Trail  
1. Press MENU|to NAVIGATE TRAIL|ENT.  
2. Now, begin moving and follow your iFINDER's instructions.  
On the map, your original trail is visible as a flashing solid line, along  
with a roughly parallel dotted line indicating the back trail to follow.  
The map contains a steer arrow in the lower right corner. This arrow  
shows you where to steer to reach the next waypoint on your back trail.  
North  
Present  
position  
arrow  
Bearing  
arrow  
Trail  
waypoint  
symbol  
Trail  
waypoint  
symbol  
Steer  
arrow  
Trail line  
When you Navigate a trail, the iFINDER gives navigation instructions on  
both the Map and Navigation pages.  
The Navigation Page will also show the trail line and a bearing arrow,  
which points to the next waypoint on the trail.  
As you travel, the arrival alarm will go off when you near a trail  
waypoint, and the steer arrow (on the map) and bearing arrow (on the  
compass rose) will swing around and point to the next trail waypoint.  
Press EXIT to clear the alarm.  
To stop navigating along the trail, use the Cancel Navigation command.  
Clearing or Erasing a Trail  
You can erase the current trail and automatically begin recording a  
new one by using the Clear Trail command.  
1. Press MENU|to CLEAR TRAIL|ENT. iFINDER asks if you're sure; press  
|ENT. 2. Return to the page by pressing EXIT.  
10  
offered by www.Busse-Yachtshop.de  
email: in[email protected] Tel: +49 (0)4347 908234  
 
LOWRANCE DATABASES LICENSE AGREEMENT  
THIS IS A LEGAL AGREEMENT BETWEEN THE END-USER WHO FIRST  
PURCHASES THIS PRODUCT AS A CONSUMER ITEM FOR PERSONAL, FAMILY,  
OR HOUSEHOLD USE ("YOU") AND LOWRANCE ELECTRONICS, INC., THE  
MANUFACTURER OF THIS PRODUCT ("WE", "OUR", OR "US"). USING THE  
PRODUCT ACCOMPANIED BY THIS LICENSE AGREEMENT CONSTITUTES  
ACCEPTANCE OF THESE TERMS AND CONDITIONS. IF YOU DO NOT ACCEPT  
ALL TERMS AND CONDITIONS, PROMPTLY RETURN THE PRODUCT WITHIN 30  
DAYS OF PURCHASE. PLEASE RETURN USING THE ENCLOSED UPS SHIPPING  
LABEL AND INCLUDE: PROOF OF PURCHASE, NAME, ADDRESS, AND PHONE  
NUMBER. YOUR PURCHASE PRICE AND ANY APPLICABLE TAXES WILL BE  
REFUNDED. PLEASE ALLOW 4-6 WEEKS TO PROCESS YOUR REFUND.  
1. This License Agreement applies to the one or more databases that your product may  
contain. We refer to these singly as a "Database" and together as the "Databases."  
Your product may thus include the "WBS Database" which contains worldwide  
background surface mapping data, the "SmartMap Database" which contains inland  
mapping data, or other Databases.  
2. The Databases that your product may contain are licensed, not sold. We grant to you  
the nonexclusive, nonassignable right to use these Databases for supplemental  
navigation reference purposes, but only as long as you comply with the terms and  
conditions of this License Agreement. We reserve the right to terminate this license if  
you violate any aspect of this License Agreement. You are responsible for using  
official government charts and prudent navigation for safe travel.  
3. The Databases housed in your product are protected by the copyright notices  
appearing on the product or its screen(s). You may NOT modify, adapt, translate,  
reverse engineer, decompile, disassemble, rent, lease, or resell any Database, and you  
may NOT create derivative works based upon any Database or its contents. Any  
unauthorized reproduction, use, or transfer of a Database may be a crime and may  
subject you to damages and attorney fees.  
4. This License Agreement will terminate immediately without prior notice from us if  
you fail to comply with or violate any of the provisions of this Agreement. Upon  
termination, you will promptly return all products containing one or more Databases  
to us.  
5. Prices and programs are subject to change without notice.  
6. This License Agreement shall be governed by the laws of the State of Oklahoma and  
comprises the complete and exclusive understanding between you and us concerning  
the above subject matter.  
11  
offered by www.Busse-Yachtshop.de  
email: in[email protected] Tel: +49 (0)4347 908234  
 
DATABASES LIMITED WARRANTY  
"We", "our", or "us" refers to Lowrance Electronics, Inc., the manufacturer of this product.  
"You" or "your" refers to the first person who purchases the product as a consumer item for  
personal, family, or household use. The Databases Limited Warranty applies to the one or  
more databases that your product may contain. We refer to each of these as a "Database" or  
together as the "Databases." Your product may thus include the "WBS Database" which  
contains worldwide background surface mapping data, the "SmartMap Database" which  
contains inland mapping data, or other Databases.  
We warrant to you that we have accurately compiled, processed, and reproduced the  
portions of the source material on which the Databases are based. However, we are under  
no obligation to provide updates to the Databases, and the data contained in the Databases  
may be incomplete when compared to the source material. WE MAKE NO EXPRESS OR  
IMPLIED WARRANTY OF ANY KIND ABOUT THE ACCURACY OF THE SOURCE  
MATERIAL ITSELF, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
If there is a defect in any Database, your exclusive remedy shall be, at our option, either a  
refund of the price you paid for the product containing the defective Database or a  
replacement of such product. WE WILL NOT UNDER ANY CIRCUMSTANCES BE  
LIABLE TO ANYONE FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR  
OTHER INDIRECT DAMAGE OF ANY KIND.  
Some states do not allow the exclusion or limitation of incidental or consequential damages,  
so the above limitations or exclusions may not apply to you.  
This warranty does NOT apply in the following circumstances: (1) when the product has  
been serviced or repaired by anyone other than us; (2) when the product has been  
connected, installed, combined, altered, adjusted, or handled in a manner other than  
according to the instructions furnished with the product; (3) when any serial number has  
been effaced, altered, or removed; or (4) when any defect, problem, loss, or damage has  
resulted from any accident, misuse, negligence, or carelessness, or from any failure to  
provide reasonable and necessary maintenance in accordance with the instructions of the  
owner’s manual for the product.  
We reserve the right to make changes or improvements in our products from time to time  
without incurring the obligation to install such improvements or changes on equipment or  
items previously manufactured.  
This warranty gives you specific legal rights and you may also have other rights which may  
vary from state to state.  
Your remedies under this warranty will be available so long as you can show in a reasonable  
manner that the defect occurred within one (1) year from the date of your original purchase,  
and we must receive your warranty claim no later than 30 days after such 1-year period  
expires. Your claim must be substantiated by a dated sales receipt or sales slip.  
12  
offered by www.Busse-Yachtshop.de  
email: in[email protected] Tel: +49 (0)4347 908234  
 
LOWRANCE ELECTRONICS  
FULL ONE-YEAR WARRANTY  
"We," "our," or "us" refers to LOWRANCE ELECTRONICS, INC., the manufacturer of this product.  
"You" or "your" refers to the first person who purchases this product as a consumer item for personal,  
family or household use.  
We warrant this product against defects or malfunctions in materials and workmanship, and against  
failure to conform to this product's written specifications, all for one (1) year from the date of original  
purchase by you. WE MAKE NO OTHER EXPRESS WARRANTY OR REPRESENTATION OF ANY  
KIND WHATSOEVER CONCERNING THIS PRODUCT. Your remedies under this warranty will be  
available so long as you can show in a reasonable manner that any defect or malfunction in materials  
or workmanship, or any non-conformity with the product's written specifications, occurred within one  
year from the date of your original purchase, which must be substantiated by a dated sales receipt or  
sales slip. Any such defect, malfunction, or non-conformity which occurs within one year from your  
original purchase date will either be repaired without charge or be replaced with a new product  
identical or reasonably equivalent to this product, at our option, within a reasonable time after our  
receipt of the product. If such defect, malfunction, or non-conformity remains after a reasonable  
number of attempts to repair by us, you may elect to obtain without charge a replacement of the  
product or a refund for the product. THIS REPAIR, OR REPLACEMENT OR REFUND (AS JUST  
DESCRIBED) IS THE EXCLUSIVE REMEDY AVAILABLE TO YOU AGAINST US FOR ANY  
DEFECT, MALFUNCTION, OR NON-CONFORMITY CONCERNING THE PRODUCT OR FOR ANY  
LOSS OR DAMAGE RESULTING FROM ANY OTHER CAUSE WHATSOEVER. WE WILL NOT  
UNDER ANY CIRCUMSTANCES BE LIABLE TO ANYONE FOR ANY SPECIAL,  
CONSEQUENTIAL, INCIDENTAL, OR OTHER INDIRECT DAMAGE OF ANY KIND.  
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the  
above limitations or exclusions may not apply to you.  
This warranty does NOT apply in the following circumstances: (1) when the product has been serviced  
or repaired by anyone other than us; (2) when the product has been connected, installed, combined,  
altered, adjusted, or handled in a manner other than according to the instructions furnished with the  
product; (3) when any serial number has been effaced, altered, or removed; or (4) when any defect,  
problem, loss, or damage has resulted from any accident, misuse, negligence, or carelessness, or from  
any failure to provide reasonable and necessary maintenance in accordance with the instructions of  
the owner's manual for the product.  
We reserve the right to make changes or improvements in our products from time to time without  
incurring the obligation to install such improvements or changes on equipment or items previously  
manufactured.  
This warranty gives you specific legal rights and you may also have other rights which may vary from  
state to state.  
REMINDER: You must retain the sales slip or sales receipt proving the date of your original purchase  
in case warranty service is ever required.  
LOWRANCE ELECTRONICS  
12000 E. SKELLY DRIVE, TULSA, OK 74128  
(800) 324-1356  
13  
offered by www.Busse-Yachtshop.de  
email: in[email protected] Tel: +49 (0)4347 908234  
 
How to Obtain Service…  
…in the USA:  
Contact the Factory Customer Service Department. Call toll-free:  
800-324-1356.  
8 a.m. to 5 p.m. Central Standard Time, M-F  
Lowrance Electronics may find it necessary to change or end our shipping policies,  
regulations and special offers at any time. We reserve the right to do so without notice.  
…in Canada:  
Contact the Factory Customer Service Department. Call toll-free:  
800-661-3983  
905-629-1614 (not toll-free)  
8 a.m. to 5 p.m. Eastern Standard Time, M-F  
…outside Canada and the USA:  
Contact the dealer in the country where you purchased your unit. To locate a dealer  
near you, visit the web site, www.lowrance.com, and look for the Dealer Locator.  
Accessory Ordering Information  
LEI Extras, Inc. is the accessory source for sonar and GPS products manufactured  
by Lowrance Electronics. To order Lowrance accessories, please contact:  
1) Your local marine dealer, outdoor equipment store or consumer electronics  
store. To locate a Lowrance dealer, visit the web site, www.lowrance.com, and  
look for the Dealer Locator. Or, consult your telephone directory for listings.  
2) U.S. customers: LEI Extras Inc., PO Box 129, Catoosa, OK 74015-0129  
Call toll free in the U.S., 800-324-0045, 8 a.m. to 5 p.m. Central  
Standard Time, M-F, or visit our web site www.lei-extras.com.  
3) Canadian customers: Lowrance/Eagle Canada, 919 Matheson Blvd. E.  
Mississauga, Ontario L4W2R7 or fax 905-629-3118.  
Call toll free in Canada, 800-661-3983, or dial 905 629-1614 (not toll free), 8  
a.m. to 5 p.m. Eastern Standard Time, M-F.  
Pub. 988-0148-622  
© Copyright 2005  
All Rights Reserved  
Lowrance Electronics, Inc.  
Printed in USA 050405  
14  
email: in[email protected] Tel: +49 (0)4347 908234  
offered by www.Busse-Yachtshop.de  
 

KTM Motorcycle 990 ADVENTURE User Manual
Kyocera Landscape Lighting KD250GX LFB2 User Manual
Lindy Switch 32254 User Manual
Lochinvar Water Heater SNA285 125 User Manual
Logitech Webcam 622866 1403 User Manual
Makita Grinder GA4534 User Manual
Makita Saw 4200H User Manual
Maytag Cooktop W10268401A User Manual
McCulloch Lawn Mower Accessory 17107 User Manual
Metrologic Instruments Scanner MS2200 Series User Manual